| Peer-Reviewed

Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension

Received: 25 March 2019     Published: 23 May 2019
Views:       Downloads:
Abstract

In this paper, the full-field strain and strain concentration factor around the hole of PTFE membrane under uniaxial biaxial tension are studied based on digital image speckle (DIC) technique and finite element calculation.Through the load-strain curve of porous membrane during tension, three stages of properties of membrane during biaxial tension are obtained: elastic stage, plastic stage and failure stage.The relationship between the maximum strain around the pore, the ultimate bearing capacity of the membrane and the pore size is obtained. The relationship between the strain concentration factor at the pore edge and the pore size is obtained.The results show that the larger the pore size, the more obvious the strain concentration around the pore and the smaller the ultimate load it can bear, and the greater the strain concentration coefficient around the pore, the more easily the membrane is damaged.

Published in Science Discovery (Volume 7, Issue 2)
DOI 10.11648/j.sd.20190702.19
Page(s) 107-114
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Digital Image, Finite Element, Strain, Aperture

References
[1] 张营营,张其林. 涂层织物类建筑膜材料的力学性能[M]. 中国矿业大学,2013。
[2] Andrzej Ambroziak , Paweł Kłosowski. Mechanical properties for preliminary design of structures made from PVC coated fabric[J]. Construction and Building Materials, 2014,50:74-81.
[3] 黄祺合,芦继忠,陶富录,陈学良,周汝贵. 大跨度膜结构屋面安装施工技术[J].结构施工,2018,40(9):1541-1543。
[4] Bigaud D, Szostkiewicz C, Hamelin P. Tearing analysis for textile reinforced soft composites under mono-axial and bi-axial tensile stresses[J]. Composite Structures, 2003,62(2):129-137.
[5] 张营营,张其林,宋晓光. PTFE膜材力学性能及抗力不定性分析[J].建筑材料学报,2014,17(4):726-733。
[6] 张营营,许珊珊,徐家豪. 聚四氟乙烯膜材黏弹性本构关系[J].建筑结构学报,2016,37(6):245-252。
[7] 马倩. 机织物撕裂破坏机理的有限元分析[J].东华大学,2010。
[8] Lianxiang Yang, Yonghong Wang, Rongsheng Lu. Advanced Optical Methods for Whole Field Displacement and Strain Measurement[J]. Oakland University,2010.
[9] 张蕊. 数字图像相关法及其在若干工程测试中的应用[J]. 华南理工大学, 2011。
[10] 谢学梁,彭博,汪文军,王珏辉,刘旨阳. 结构健康监测系统的设计与实现[J].电子测试,2018,22(025):60-62。
[11] 高新京,吴明超. 膜结构工程技术与应用[M].北京:机械工业出版社,2010:23-25。
[12] 陈新忠,曹远威,刘世伟,毛仲敏,张吉雄. 基于数字图像的非接触式泊松比测试方法[J].煤炭学报,2014,39(S2):366-371。
[13] 章辉,郑宇英. 膜结构用涂层织物拉伸与撕裂性能测试方法及关系研究[J].纺织标准与质量,2009,4:34-39。
[14] 汪泽幸,何斌,陈妍,李洪登. 损伤条件下聚氯乙烯涂层膜结构材料拉伸蠕变特性[J].纺织学报,2017,38(10):57-64。
Cite This Article
  • APA Style

    Wang Wei, Xu Xiaochen, Xu Zhihong. (2019). Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension. Science Discovery, 7(2), 107-114. https://doi.org/10.11648/j.sd.20190702.19

    Copy | Download

    ACS Style

    Wang Wei; Xu Xiaochen; Xu Zhihong. Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension. Sci. Discov. 2019, 7(2), 107-114. doi: 10.11648/j.sd.20190702.19

    Copy | Download

    AMA Style

    Wang Wei, Xu Xiaochen, Xu Zhihong. Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension. Sci Discov. 2019;7(2):107-114. doi: 10.11648/j.sd.20190702.19

    Copy | Download

  • @article{10.11648/j.sd.20190702.19,
      author = {Wang Wei and Xu Xiaochen and Xu Zhihong},
      title = {Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension},
      journal = {Science Discovery},
      volume = {7},
      number = {2},
      pages = {107-114},
      doi = {10.11648/j.sd.20190702.19},
      url = {https://doi.org/10.11648/j.sd.20190702.19},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190702.19},
      abstract = {In this paper, the full-field strain and strain concentration factor around the hole of PTFE membrane under uniaxial biaxial tension are studied based on digital image speckle (DIC) technique and finite element calculation.Through the load-strain curve of porous membrane during tension, three stages of properties of membrane during biaxial tension are obtained: elastic stage, plastic stage and failure stage.The relationship between the maximum strain around the pore, the ultimate bearing capacity of the membrane and the pore size is obtained. The relationship between the strain concentration factor at the pore edge and the pore size is obtained.The results show that the larger the pore size, the more obvious the strain concentration around the pore and the smaller the ultimate load it can bear, and the greater the strain concentration coefficient around the pore, the more easily the membrane is damaged.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Full-Field Strain Analysis of Porous Membrane Under Biaxial Tension
    AU  - Wang Wei
    AU  - Xu Xiaochen
    AU  - Xu Zhihong
    Y1  - 2019/05/23
    PY  - 2019
    N1  - https://doi.org/10.11648/j.sd.20190702.19
    DO  - 10.11648/j.sd.20190702.19
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 107
    EP  - 114
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20190702.19
    AB  - In this paper, the full-field strain and strain concentration factor around the hole of PTFE membrane under uniaxial biaxial tension are studied based on digital image speckle (DIC) technique and finite element calculation.Through the load-strain curve of porous membrane during tension, three stages of properties of membrane during biaxial tension are obtained: elastic stage, plastic stage and failure stage.The relationship between the maximum strain around the pore, the ultimate bearing capacity of the membrane and the pore size is obtained. The relationship between the strain concentration factor at the pore edge and the pore size is obtained.The results show that the larger the pore size, the more obvious the strain concentration around the pore and the smaller the ultimate load it can bear, and the greater the strain concentration coefficient around the pore, the more easily the membrane is damaged.
    VL  - 7
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, Nanjing University of Science and Technology, Nanjing, China

  • Nanjing Institute of Electronic Technology, Nanjing, China

  • Department of Civil Engineering, Nanjing University of Science and Technology, Nanjing, China

  • Sections